PROTECT YOUR DNA WITH QUANTUM TECHNOLOGY
Orgo-Life the new way to the future Advertising by AdpathwayThe Future Circular Collider electron-positron stage, known as FCC-ee, presents major vacuum engineering challenges across its planned 100-kilometer circumference twin-ring storage ring accelerator. As detailed by physicist Roberto Kersevan in EPJ Techniques and Instrumentation, the vacuum architecture must accommodate widely divergent operating parameters during a 15-year research program, transitioning from an intense, high-current Z-pole mode at 45.6 gigaelectronvolts to a high-energy ttbar threshold reaching 182.5 gigaelectronvolts. The physical scale of the double-ring layout requires a unified vacuum system capable of managing extreme variations in synchrotron radiation spectra, where critical photon energies span a factor of 64 from 19.5 kiloelectronvolts at the Z-pole to over 1.2 megaelectronvolts at the top-quark benchmark. To advance from conceptual designs toward physical prototyping under the FCC Innovation Study, researchers have developed specialized vacuum chambers, integrated photon absorbers, and distributed pumping strategies designed to achieve nominal ultra-high vacuum conditions within two years of beam commissioning.
In electron and positron storage rings, vacuum degradation is primarily driven by photon-stimulated desorption, an effect wherein stored particle beams produce intense synchrotron radiation that strikes chamber walls and desorbs residual gas molecules. The total desorption gas load Q is determined mathematically by the product of the molecular desorption yield eta, the incident photon flux F, and an ideal gas conversion constant k that converts molar quantities into pressure-volume units. At a reference room temperature of 20 degrees Celsius, this proportionality constant k evaluates to precisely 4.047 times 10 to the power of negative 20 millibar-liters per mole. The total photon flux F depends directly on beam energy E in gigaelectronvolts, circulating electrical current I in milliamperes, and a spectral factor kF that accounts for the fraction of radiation emitted above a 4 electronvolt threshold. This cut-off energy represents the physical limit below which photoelectron emission and resulting gas desorption cease in common accelerator metals.
The total radiated synchrotron power P and its characteristic hardness define the operational constraints imposed on the collider vacuum vessel. Synchrotron power scales with the product of beam current and the fourth power of beam energy divided by the local magnetic bending radius rho, modified by a power correction factor kP that remains close to unity for primary dipole fields. Concurrently, the synchrotron critical energy epsilon c is defined by 2.218 multiplied by the cube of beam energy and divided by the dipole radius. Because critical energy depends on the cube of beam energy, the radiation hardness increases by a factor of 64 between the low-energy Z-pole mode and the highest-energy ttbar operational stage. Consequently, while the Z-pole demands vacuum systems engineered to handle maximum photon fluxes and peak volumetric desorption gas loads, the higher-energy regimes produce penetrating megavolt radiation requiring specialized radiation shielding around sensitive tunnel components and detector machine-detector interface areas.
Spectral calculations reveal that once beam energy reaches the intermediate W boson production threshold, a substantial fraction of the emitted synchrotron photon flux exceeds 100 kiloelectronvolts, which represents the Compton edge for aluminum. Photons exceeding this threshold undergo Compton scattering within the bulk material of the vacuum chamber walls and adjacent magnet pole assemblies, scattering secondary electrons and hard photons back into the vacuum chamber bore. This backscattering process induces an intense secondary cascade of lower-energy photons and photoelectrons that exacerbates photon-stimulated gas desorption along the beam orbit, matching physical phenomena recorded during the Phase-2 energy upgrade of the Large Electron-Positron collider and confirmed by FLUKA numerical models. To suppress this secondary cascade immediately upstream of high-energy collision points, the machine lattice incorporates weaker magnetic dipole fields in the final bending magnets before each interaction point, maintaining the local synchrotron radiation critical energy safely below the critical 100 kiloelectronvolt threshold.
Material selection for the FCC-ee beam vacuum envelope required balancing mechanical rigidity, thermal conductance, electrical conductivity, fabrication practicality, and radiation attenuation. Although extruded aluminum offers manufacturing advantages and low raw material costs, simulation studies showed it is highly transparent to hard synchrotron radiation, permitting excessive ionizing radiation to escape into the accelerator tunnel and degrade auxiliary equipment. Consequently, engineers selected oxygen-free silver-grade copper alloy, known as OFS copper, as the primary chamber material due to its proven welding and brazing properties, high thermal and electrical conductivity, and superior radiation stopping performance. Auxiliary vacuum hardware relies on specialized metallurgical selections, including forged and hydroformed 316 LN stainless steel for pumping domes and flexible bellows assemblies, alongside high-strength beryllium-copper alloy C17410 for low-impedance radiofrequency contact fingers. Furthermore, permanent cold-sprayed bake-out systems combining ceramic plasma spray insulation with metallic cold-spray coatings are planned by CERN to provide radiation-hard thermal processing across all arc chambers.
The cross-sectional profile of the arc vacuum chamber adapts the geometric concept implemented at SuperKEKB, consisting of a central circular tube flanked by two lateral winglets positioned horizontally within the orbital plane. The circular beam aperture features an inner diameter of 70 millimeters, scaled down from the 90-millimeter chamber of SuperKEKB, while the total horizontal cross section across both winglets measures 115 millimeters. This geometry fits within the pole gaps of all arc dipole and quadrupole magnets and allows extrusion manufacturing without longitudinal structural welds. The chamber walls have increased thickness around the winglet transitions to relieve local mechanical stresses generated during extrusion forming. Positioned along these lateral winglet channels are discrete copper-alloy photon absorbers designed to intercept primary synchrotron radiation fans. By angling the absorber impact face at 45 degrees relative to incident photons, the local surface power density is held near 40 watts per square millimeter at the Z-pole energy, preventing excessive copper temperatures at the internal water-cooling channels.
Evacuating the extensive vacuum system relies on a distributed pumping configuration centered on non-evaporable getter thin-film coating applied to the interior copper chamber walls. Developed and refined over twenty years of implementation on lepton storage rings, non-evaporable getter coatings deliver continuous distributed pumping while maintaining low photon-stimulated desorption yields and minimal secondary electron yields, which helps suppress electron-cloud instabilities. Assuming an average molecular desorption yield of 10 to the power of negative 6 molecules per photon after an integrated beam dose of 1000 ampere-hours, calculations show that arc vacuum chambers will not require replacement during future beam energy increases, as they will benefit from intense surface pre-conditioning accumulated during initial high-current Z-pole operations.
Vacuum performance modeling was conducted using the three-dimensional raytracing Monte Carlo simulation suites SYNRAD+ and Molflow+, both developed at CERN. SYNRAD+ reads magnetic lattice orbits from MADX lattice files and imports computer-aided design chamber models to calculate synchrotron radiation fans and surface irradiation mapping under the dipole approximation. Molflow+ imports these radiation profiles and simulates molecular flow dynamics to evaluate local gas desorption and equilibrium pressure distributions. Numerical comparisons between arc chambers with discrete absorbers and unshielded configurations demonstrated that intercepting synchrotron radiation on compact 150-millimeter absorber surfaces significantly accelerates vacuum conditioning. Because photon-stimulated desorption rates scale inversely with accumulated photon dose density according to a power law with exponents typically between 0.5 and 0.8, concentrating the photon flux density by factors of 35 to 40 shortens the overall vacuum cleanup time by an average factor of 8.5 compared to distributing radiation uniformly along chamber side walls.
Vacuum optimization in the Machine Detector Interface represents one of the most demanding engineering tasks of the FCC-ee project, requiring rigorous protection of particle physics detectors and central beryllium beam pipes. To counteract anti-bending magnetic fields and trap forward-scattered photons, the final 600 meters of vacuum chamber upstream of each interaction point feature dual-sided discrete photon absorbers paired with dedicated lumped getter pumps. This pumping configuration produces an average operating pressure profile in the low 10 to the negative 10 millibar range. Suppressing residual gas density in this region is essential to minimize beam-gas bremsstrahlung interactions that generate background noise in experimental detectors, with the modeled pressure profiles currently serving as foundational inputs for global FLUKA particle transport calculations.
Transitioning from theoretical designs toward physical prototypes, researchers in the European FCC Innovation Study program are fabricating and evaluating initial vacuum hardware. Experimental testing of two-meter-long extruded vacuum chambers and discrete copper absorbers is scheduled at the BESTEX beamline at the KARA synchrotron light source. Because the beamline cannot reproduce the extreme power densities expected in FCC-ee, separate thermal testing utilizing high-power electron beam devices will evaluate absorber cooling performance under heavy heat flux. Concurrently, engineers are developing compact shape-memory alloy vacuum flanges coupled to additively manufactured beam-position monitor blocks, alongside low-impedance radiofrequency bellows assemblies.
Subject of Research: Vacuum system design and prototyping for the Future Circular Collider electron-positron rings
Article Title: The FCC-ee vacuum system, from conceptual to prototyping
Article References: Kersevan, R. (2022). The FCC-ee vacuum system, from conceptual to prototyping. EPJ Techniques and Instrumentation, 9(1), Article 12. https://doi.org/10.1140/epjti/s40485-022-00087-w
Image Credits: AI Generated
DOI: 10.1140/epjti/s40485-022-00087-w
Keywords: Future Circular Collider, FCC-ee, vacuum system, synchrotron radiation, photon-stimulated desorption, NEG coating, copper vacuum chamber, SuperKEKB geometry, SR absorbers, Machine Detector Interface, SYNRAD+, Molflow+, BESTEX beamline, KARA light source, shape memory alloy flanges, electron cloud mitigation, Z-pole


1 hour ago
3




















English (US) ·
French (CA) ·