PROTECT YOUR DNA WITH QUANTUM TECHNOLOGY
Orgo-Life the new way to the future Advertising by AdpathwayExperimental results from the development of a naturally aspirated, direct-injection hydrogen rotary engine demonstrate that targeted optimization of the fuel injection system enhances maximum torque capability and operational robustness without increasing system complexity. Investigators found that increasing the hydrogen mass flow rate while maintaining a constant pressure level significantly reduced the required injection duration, enabling improved mixture control and mitigating pre-ignition tendencies that previously constrained performance.
Hydrogen-fuelled rotary engines represent a promising alternative for zero-impact powertrains in commercial applications where compact packaging and high power-to-weight ratios are required. Although a lean hydrogen-air mixture has a lower volumetric energy density compared to conventional fuels, the compact design of the rotary engine permits installation within the packaging space of a conventional internal combustion engine while achieving comparable power output.
In the tested powertrain architecture, the naturally aspirated direct-injection engine was integrated with an electric machine into a hybrid or genset system. Previous practical applications, including deployment in an airport baggage tractor, had confirmed the initial operational feasibility of the concept.
However, subsequent engine calibration identified pre-ignition phenomena that constrained the engine’s maximum torque output. This operating limitation restricted the engine’s usable operating range, making an enhanced fuel delivery approach necessary to sustain higher mechanical loads.
To expand this operating range, the research evaluated the effects of an increased hydrogen mass flow rate at constant injection pressure on engine operating behaviour, efficiency, and nitrogen oxide emissions. This investigation was made possible by an enhanced injection system equipped with dedicated hydrogen injectors.
The experimental measurements confirmed that higher injection mass flow rates substantially shortened injection durations, permitting more precise spatial placement of hydrogen within the combustion chamber. In addition to suppressing pre-ignition tendencies and enabling higher load operation, systematic parameter variation across multiple operating points revealed a strong interaction between injection strategy, nitrogen oxide formation, and combustion stability.
Subject of Research: Hydrogen direct injection optimization for commercial rotary combustion engines
Article Title: Increasing maximum torque of a small hydrogen combustion engine for commercial applications with an optimised injection system
Article References: Endres, J., Beidl, C., Viehmann, A., Herold, T., Lavall, P., & Hofmann, S. (2026). Increasing maximum torque of a small hydrogen combustion engine for commercial applications with an optimised injection system. Automotive and Engine Technology. https://doi.org/10.1007/s41104-026-00182-0
Image Credits: AI Generated
DOI: 10.1007/s41104-026-00182-0
Keywords: hydrogen combustion engines, rotary engines, direct injection, torque capability, pre-ignition, injection mass flow rate, nitrogen oxide emissions, powertrain engineering, commercial applications, hybrid systems, genset systems, mixture control, combustion stability, airport baggage tractors, naturally aspirated engines, hydrogen injectors, power-to-weight ratio


1 day ago
14




















English (US) ·
French (CA) ·