PROTECT YOUR DNA WITH QUANTUM TECHNOLOGY
Orgo-Life the new way to the future Advertising by AdpathwayA numerical study evaluates the cooling performance of photovoltaic systems integrated with mini-channels, partial porous media, and fins to regulate operational temperatures and boost overall efficiency. By examining cross-flow arrangements and varying fluid dynamics, the investigation quantifies how specific channel geometries and working fluids influence operating conditions.
The numerical findings show that integrating a mini-channel significantly reduces cell operating temperatures compared to an uncooled panel. When air was used as the working fluid within the mini-channel, the electrical efficiency of the photovoltaic panel increased by approximately 10 to 17 percent over the uncooled baseline. Introducing water as the coolant achieved even greater improvements, increasing electrical efficiency by about 25 to 27 percent relative to the panel operating without cooling.
Direct comparisons between the two coolants at identical Reynolds numbers revealed substantial shifts in thermodynamic metrics alongside hydraulic trade-offs. Transitioning the working medium from air to water produced an 8 to 13 percent gain in electrical efficiency, a 7 to 8 percent increase in exergy efficiency, and a 136 to 150 percent surge in thermal efficiency. However, substituting water for air also generated an approximate threefold increase in pressure drop through the channel path.
To further augment heat exchange, the researchers incorporated a partial porous medium into the cross-flow path of the channel. This addition altered overall system performance by approximately 0.2 to 7 percent, with exact impacts governed by the medium’s porosity, permeability, and solid matrix conductivity. The single largest individual contributor among these properties was the solid-to-fluid conductivity ratio, which produced a 7.2 percent increase in thermal efficiency across the modeled domain.
The configuration and distribution of these porous sections directly influenced flow behavior under changing hydrodynamic regimes. When comparing configurations designated as Case 3–1 through Case 3–3, increasing the number of porous regions enhanced the electrical efficiency gains observed as the Reynolds number increased. Specifically, the electrical efficiency improvement achieved by raising the Reynolds number expanded from 7.9 percent in Case 3–1 to 11.0 percent in Case 3–3.
The investigation also evaluated mini-channels equipped with fins of varying heights, cataloged as Cases 4–1 through 4–3. Within this sequence, Case 4–3 emerged as the most effective structural layout. As the flow Reynolds number scaled from 40 to 1500, the thermal efficiency of Case 4–3 rose by 131 percent, climbing from approximately 0.28 to 0.645, while its corresponding electrical efficiency increased by 8.7 percent.
Beyond physical fluid simulations, the researchers employed a random forest machine learning algorithm to predict multi-variable performance metrics. Trained directly on the data generated during the numerical investigation, the random forest model simultaneously estimated electrical and thermal efficiencies with high accuracy.
To assist system designers in balancing competing operational parameters, the authors implemented a multi-criteria decision-making strategy using the TOPSIS method. This framework simultaneously weighted electrical efficiency, thermal efficiency, and pressure drop penalties to determine the optimal channel layout. Sensitivity testing confirmed that the resulting configuration rankings remained stable even when relative criteria weights were varied across different engineering priorities.
Subject of Research: Photovoltaic cooling performance using porous mini-channels and machine learning predictions
Article Title: Machine learning-based performance prediction of photovoltaic cooling systems with porous mini-channels
Article References: Farahani, S. D., Rabiee, A., Jafarmadar, S., & Alizadeh, A. (2026). Machine learning-based performance prediction of photovoltaic cooling systems with porous mini-channels. Discover Applied Sciences. https://doi.org/10.1007/s42452-026-09920-3
Image Credits: AI Generated
DOI: 10.1007/s42452-026-09920-3
Keywords: photovoltaic cooling, mini-channel, porous medium, cross-flow, solar cell efficiency, thermal efficiency, electrical efficiency, random forest, TOPSIS, fluid dynamics, pressure drop, Reynolds number, heat transfer, cooling systems, variable height fins, exergy efficiency


17 minutes ago
2




















English (US) ·
French (CA) ·