PROTECT YOUR DNA WITH QUANTUM TECHNOLOGY
Orgo-Life the new way to the future Advertising by AdpathwayA recent study has identified that controlled aging processes can effectively modulate the crystallographic texture and resulting anisotropy of additively manufactured titanium alloys. By applying specific solution and aging treatments to Ti-47553 alloy components produced via wire arc additive manufacturing (WAAM), researchers revealed critical relationships between aging temperatures, the precipitation of α variants, and the final material properties.
The study investigated samples subjected to different aging temperatures—labeled STA500, STA550, and STA600—following an initial solution treatment. Findings indicate that the morphology of the precipitated α phase is highly sensitive to the aging temperature chosen. While acicular α phase precipitates were observed in both the STA500 and STA550 samples, they were conspicuously absent in the STA600 microstructure. This absence was attributed to an insufficient driving force during the aging process, stemming from a small temperature discrepancy between the solution and aging stages.
A core focus of the research was the phenomenon of variant selection within the β grains of the alloy. Across all three aged conditions, 12 α variants were found to precipitate within these β grains, displaying a near-Cube orientation. The team analyzed five theoretical types of misorientation axis-angle pairs, finding distinct statistical differences in the dominant orientation angles among the samples. Specifically, the STA500 and STA600 samples were characterized by a prevalence of 60° misorientation angles, whereas the STA550 sample showed a dominance of 90° angles.
These variations in misorientation indicate that self-accommodation occurs during precipitation and that the specific types of variant selection are dependent on the aging conditions. The researchers further examined the volume fraction of each variant, confirming that the variants with the highest volume fractions differed significantly between the three conditions. This demonstrates that the variant types formed within the same parent β orientation are not consistent across varying aging treatments.
The orientation dispersion was found to be notably affected by these variant dynamics. As the volume fraction of the acicular α phase increases, the orientation dispersion is intensified. The coexistence of these multiple α variants is a critical mechanism in the alloy, as it effectively reduces the overall texture intensity. By mitigating strong crystallographic textures, the material demonstrates a significant weakening of property anisotropy, which is essential for the reliability of complex, additively manufactured components in high-end industrial applications.
This research provides a systematic understanding of how post-processing heat treatments can be tailored to manage the microstructural evolution of near-β titanium alloys. The ability to manipulate variant selection and misorientation through aging parameters offers a pathway to optimizing the mechanical uniformity of components produced via wire arc additive manufacturing, potentially enhancing their performance in demanding engineering environments.
The researchers highlight that wire arc additive manufacturing (WAAM) presents a significant technological advantage for the integrated production of complex, high-performance titanium alloy components. By successfully tailoring the crystallographic texture of the Ti-47553 alloy, the study demonstrates a viable pathway to meet the stringent performance demands of modern high-end industrial sectors. Furthermore, the systematic investigation reveals how self-accommodation during precipitation plays a fundamental role in material behavior. The process of variant selection, which fluctuates across distinct aging thermal profiles, ultimately facilitates a controlled reduction in the overall intensity of the crystallographic texture, a critical factor for ensuring the mechanical reliability and structural uniformity of manufactured parts.
Subject of Research: Metallurgy of WAAM-processed Titanium Alloys
Article Title: Tailoring anisotropy in a WAAM-processed near-β Ti alloy through aging processing: roles of variant selection and misorientation
Article References: Liu, M., Zhang, P., Hao, Y., Qiao, J., Li, Y., Ma, W., Zang, M., & Zhang, P. (2026). Tailoring anisotropy in a WAAM-processed near-β Ti alloy through aging processing: roles of variant selection and misorientation. Journal of Materials Science. https://doi.org/10.1007/s10853-026-14030-x
Image Credits: AI Generated
DOI: 10.1007/s10853-026-14030-x
Keywords: Wire Arc Additive Manufacturing, Beta Titanium Alloys, Crystallographic Texture, Anisotropy, Aging Processing, Material Science, Titanium Precipitation, Variant Selection, Microstructure Evolution, Additive Manufacturing, Ti-47553 Alloy, Solution Treatment, Material Characterization, Crystal Orientation, Phase Transformation


1 hour ago
11




















English (US) ·
French (CA) ·