Language Selection

Get healthy now with MedBeds!
Click here to book your session

Protect your whole family with Orgo-Life® Quantum MedBed Energy Technology® devices.

Advertising by Adpathway

         

 Advertising by Adpathway

Laser-Guided Polyaniline Nanofibers on Carbon Cloth Boost Flexible Supercapacitor Performance

1 hour ago 8

PROTECT YOUR DNA WITH QUANTUM TECHNOLOGY

Orgo-Life the new way to the future

  Advertising by Adpathway

A multi-step fabrication strategy that couples two-step laser treatment with two-step electropolymerization successfully resolves longstanding morphological and adhesion limitations in flexible supercapacitor materials, according to a study published in the Journal of Materials Science. The technique directs the morphological evolution of polyaniline on carbon cloth from preliminary nanospheres into a dense, interconnected three-dimensional nanofiber network, yielding substantial gains in supercapacitive charge storage.

Polyaniline has long been recognized as a promising active material for flexible energy storage platforms, yet its broader adoption has been constrained by poor morphological control and weak interfacial adhesion to supporting current collectors. To overcome these specific structural obstacles, the researchers devised an integrated processing sequence that begins by subjecting bare carbon cloth to an initial laser treatment, followed immediately by a first round of electropolymerization that generates polyaniline nanospheres.

Building upon the initial nanospheres, the team applied a second laser treatment to generate active sites across the pre-deposited polymer surfaces. This laser-induced surface activation effectively guides the subsequent second electropolymerization stage, directing the nanospheres to transform into an interconnected, dense three-dimensional network composed of polyaniline nanofibers distributed over the conductive carbon cloth.

This engineered three-dimensional nanofiber architecture provides clear physical and electrochemical benefits. The porous arrangement enhances proton doping throughout the conductive polymer while providing rich ion-diffusion channels that facilitate charge transport during operation. In addition, the sequential processing strengthens C–N covalent bonding between the polyaniline active layer and the carbon cloth substrate, reinforcing interfacial attachment against mechanical and electrochemical detachment.

Electrochemical characterization showed that the resulting optimal electrode, designated as LCP-LP, achieved an areal capacitance of 5357.6 mF cm−2 at an applied current density of 1 mA cm−2. The optimized electrode also maintained remarkable electrochemical stability under elevated operational demands, successfully retaining more than 95% of its capacitance across the full current-density range from 1 to 5 mA cm−2.

To evaluate practical viability, the researchers assembled a complete symmetric flexible supercapacitor using the optimized material. The full device exhibited an areal capacitance of 3552.1 mF cm−2 at a current density of 1 mA cm−2, maintaining 2693.1 mF cm−2 when the current density was increased to 5 mA cm−2, which corresponds to 75.8% capacitance retention. The device also achieved an energy density of 343.6 μWh cm−2 alongside a power density of 2424.8 μW cm−2.

Beyond energy and power metrics, the assembled symmetric flexible supercapacitor displayed excellent mechanical flexibility and sustained long-term cycling stability, retaining 87.4% of its original capacitance after 8000 charge-discharge cycles. The authors conclude that this synergistic combination of dual-step laser processing and dual-step electropolymerization provides an effective pathway for designing robust conductive-polymer electrodes tailored for wearable electronic applications.

Subject of Research: Polyaniline nanofiber electrodes for flexible supercapacitors

Article Title: Morphological evolution from nanospheres to nanofibers on laser-treated carbon cloth via two-step electropolymerization: enhanced supercapacitive performance

Article References: Chen, H., Peng, D., Cao, Y., Ke, S., & Peng, W. (2026). Morphological evolution from nanospheres to nanofibers on laser-treated carbon cloth via two-step electropolymerization: enhanced supercapacitive performance. Journal of Materials Science. https://doi.org/10.1007/s10853-026-14133-5

Image Credits: AI Generated

DOI: 10.1007/s10853-026-14133-5

Keywords: polyaniline, supercapacitors, flexible electronics, electropolymerization, laser treatment, carbon cloth, energy materials, nanofibers, nanospheres, areal capacitance, energy density, power density, cycling stability, conductive polymers, wearable electronics, proton doping, ion diffusion

Read Entire Article

         

        

Start the new Vibrations with a Medbed Franchise today!  

Protect your whole family with Quantum Orgo-Life® devices

  Advertising by Adpathway